Sant Globe Valves

38 families of Sant Globe Valves, 8–300 mm, with 301 sizes listed and priced.

What this range covers

Sizes 8–300 mm
Body materials Gunmetal (LTB-2, IS 318), Bronze, Carbon steel (WCB, ASTM A216), Stainless steel CF8 (SS 304), Cast iron (FG 200, IS 210), Forged brass (IS 319)
End connections Flanged, Screwed BSP (parallel), Socket weld, Screwed NPT
Pressure ratings PN 16, PN 20, PN 25, PN 40
List price range ₹880.00 – ₹494,378.00 ex-GST

About the Sant globe valves range

We hold the Sant agency directly. The Sant globe valve range runs to 38 families, 8 mm to 300 mm, in 6 body materials.

A globe valve range frequently offers the same body with a choice of trim — a plain metal disc, a stainless-fitted seat, or a Teflon disc — and the choice is a service-life decision as much as a price one. On steam or repeated-cycling duty the cheaper metal-to-metal trim is the one that needs re-facing first.

The Sant range here is supplied in gunmetal to IS 318 LTB-2 for potable and general water service, carbon steel WCB for steam and higher pressures, bronze for water and low-pressure steam and cast iron to IS 210 for larger bores on water duty, and 2 more. Getting the material right is the part of the specification that cannot be corrected on site. The medium and the working temperature settle it; the size does not enter into it.

Sizes span 8–25 mm, 32–50 mm, 65–100 mm, 125–200 mm and 250–300 mm. Across that range the construction changes more than once, so a size at the top of the range and one at the bottom are related products rather than the same product in two sizes.

You can have Flanged, Screwed BSP (parallel) and Socket weld ends on this range. Matching the connection to what is already installed is the difference between a valve that is fitted in an afternoon and one that waits for a fabricator.

Available classes are PN 16, PN 25, PN 20 and PN 40. A class is what the body is tested to; the working pressure it may be held at falls as the temperature rises, which is what the manufacturer's chart is for.

Test certificates are available against the order where the product carries them. It is worth confirming the requirement before the order is placed rather than at delivery.

Send the medium and the working temperature, which decide bonnet and trim with the schedule when you enquire about globe valves. Sizes and quantities alone leave the one question open that decides which valve is actually correct.

List prices on this site are ex-GST. Registered buyers see their own net rates once signed in.

All 38 Sant families

Other Sant ranges we carry

Common questions

What sizes does Sant Globe Valves come in?

8 mm to 300 mm, across 38 families with sizes and list prices given on this page.

What body materials are available in Sant Globe Valves?

Gunmetal (LTB-2, IS 318), Bronze, Carbon steel (WCB, ASTM A216), Stainless steel CF8 (SS 304), Cast iron (FG 200, IS 210), Forged brass (IS 319), matched to the medium and pressure the size table specifies.

What pressure ratings does Sant Globe Valves cover?

PN 16, PN 25, PN 20, PN 40 — check the individual family page for the rating that applies at the size you need.

What end connections does Sant Globe Valves use?

Flanged, Screwed BSP (parallel), Socket weld, Screwed NPT, depending on the family and size — see the size table for the exact connection at the size you need.

Need a price on Sant Globe Valves?

Send the sizes, quantities and the duty. We will come back with a priced offer, alternatives where a substitution makes sense, and realistic lead times.

Request a quote