Sant Pressure Reducing Valves

5 families of Sant Pressure Reducing Valves, 15–100 mm, with 29 sizes listed and priced.

What this range covers

Sizes 15–100 mm
Body materials Gunmetal (LTB-2, IS 318), Bronze, Stainless steel CF8 (SS 304), Cast iron (FG 200, IS 210), Forged brass (IS 319)
End connections Screwed BSP (parallel), Flanged
List price range ₹2,698.00 – ₹194,664.00 ex-GST

About the Sant pressure reducing valves range

This is the full Sant pressure reducing valve range we are authorised to supply — 5 families, 15 mm to 100 mm, across 5 body materials.

A pressure reducing valve is sized on flow and on the ratio between inlet and outlet pressure, not on the pipe it fits. Too large a valve hunts at low flow; too high a reduction ratio in a single stage brings noise and cavitation, and is the usual reason a station is built in two stages.

The Sant range here is supplied in forged brass on small-bore service lines, CF8 stainless where the medium attacks a copper alloy, gunmetal to IS 318 LTB-2 for potable and general water service and bronze for water and low-pressure steam, and 1 more. What the line carries, and how hot it runs, decide the body. Those two facts narrow the choice before bore, class or budget are considered at all.

Sizes run across 15–25 mm, 32–50 mm and 65–100 mm. Construction usually changes with the size rather than continuing unbroken: small bores are screwed and made in a copper alloy, while the larger end of the range is flanged and cast.

Ends available are Screwed BSP (parallel) and Flanged. This is worth confirming against the pipework drawing rather than assumed: changing a valve's end connection after delivery means changing the pipework.

Test certificates are available against the order where the product carries them. It is worth confirming the requirement before the order is placed rather than at delivery.

To quote pressure reducing valves properly we need the inlet and outlet pressures and the flow range, including the lowest flow in addition to sizes and quantities. Everything else on the enquiry can be inferred; that cannot.

Prices are ex-GST list. Where a size is not shown, ask — the range extends beyond what is held as standard.

All 5 Sant families

Other Sant ranges we carry

Check & Non-Return Valves 54 Globe Valves 38 Gate Valves 23 Y-Strainers 23 Butterfly Valves 15 Ball Valves 14 Water Meters 10 Safety & Relief Valves 8 Water Level Gauges 7 Sluice Valves 6 Flow Meters 4 Fusible Plugs 4 Balancing Valves 3 Sight Glasses 3 Gauge Valves 3

Common questions

What sizes does Sant Pressure Reducing Valves come in?

15 mm to 100 mm, across 5 families with sizes and list prices given on this page.

What body materials are available in Sant Pressure Reducing Valves?

Gunmetal (LTB-2, IS 318), Bronze, Stainless steel CF8 (SS 304), Cast iron (FG 200, IS 210), Forged brass (IS 319), matched to the medium and pressure the size table specifies.

What end connections does Sant Pressure Reducing Valves use?

Screwed BSP (parallel), Flanged, depending on the family and size — see the size table for the exact connection at the size you need.

How much does Sant Pressure Reducing Valves cost?

List prices in this range run from ₹2,698.00 to ₹194,664.00 ex-GST, depending on size and specification — the exact figure for each size is in the table above.

Need a price on Sant Pressure Reducing Valves?

Send the sizes, quantities and the duty. We will come back with a priced offer, alternatives where a substitution makes sense, and realistic lead times.

Request a quote