DRP Globe Valves
12 families of DRP Globe Valves, 8–100 mm, with 88 sizes listed and priced.
What this range covers
| Sizes | 8–100 mm |
|---|---|
| Body materials | Bronze, Gunmetal (LTB-2, IS 318) |
| End connections | Screwed BSP (parallel), Flanged |
| Standards | IS 778, JIS 5K |
| List price range | ₹923.00 – ₹76,026.00 ex-GST |
About the DRP globe valves range
Every DRP globe valve we supply is listed on this page: 12 families spanning 8 mm to 100 mm, in 2 body materials.
A forged-steel globe valve carrying a boiler-regulation certification is not a premium version of the same cast valve one class down — it is built and tested to a different, legally mandated standard because the duty (steam, high pressure, a boiler feed line) carries a consequence a certified valve exists specifically to control. That certification is what a specification naming it is actually asking for, not an optional extra.
The DRP range here is supplied in gunmetal to IS 318 LTB-2 for potable and general water service and bronze for water and low-pressure steam. The medium chooses the material. Cost only breaks a tie between two bodies that both suit the duty, and a body that fails on temperature is not cheaper for having cost less.
Bores available are 8–25 mm, 32–50 mm and 65–100 mm. Above roughly 50 mm the pattern shifts to flanged cast bodies, and flange drilling, weight and lifting become part of the order rather than an afterthought.
End connections run to Screwed BSP (parallel) and Flanged. The connection has to be settled against the mating pipework before a size is ordered — a flanged valve and a screwed one are not interchangeable on an installed line.
Products in this range are built to IS 778 and JIS 5K. The standard is what a consultant writes into a specification, so it is worth quoting it on the enquiry.
Works test certificates and material certificates can be supplied with the consignment where the standard calls for them, but they have to be asked for at the time of order rather than afterwards.
When you send an enquiry for globe valves, include the medium and the working temperature, which decide bonnet and trim alongside the sizes and quantities. It is the detail that most often has to be chased before a quotation can be priced, and supplying it up front saves a round trip.
Prices are ex-GST list. Where a size is not shown, ask — the range extends beyond what is held as standard.
All 12 DRP families
-
40–65 mmBronzeScrewed BSP
DRP Bronze Terrace Valve, Screwed
Price range: ₹10,820.00 through ₹13,361.00 -
15–80 mmBronzeFlanged
DRP Bronze Union Bonnet Valve No. 9 with S.S. Part, Flanged
Price range: ₹6,546.00 through ₹63,162.00 -
8–80 mmBronzeScrewed BSP
DRP Bronze Union Bonnet Valve No. 9 with S.S. Part, Screwed
Price range: ₹2,370.00 through ₹39,905.00 -
15–50 mmBronzeScrewed BSP
DRP Bronze Union Bonnet Valve No. 9 with Teflon Disc, Screwed
Price range: ₹2,486.00 through ₹17,682.00 -
15–50 mmBronzeScrewed BSP
DRP Bronze Wheel Valve No. 5 with S.S. Part, Screwed
Price range: ₹1,948.00 through ₹13,202.00 -
15–50 mmBronzeScrewed BSP
DRP Bronze Wheel Valve No. 5 with Teflon Disc, Screwed
Price range: ₹2,040.00 through ₹13,868.00 -
8–50 mmGunmetalScrewed BSP
DRP G.M. Angle Wheel Valve No. 4, Screwed
Price range: ₹1,184.00 through ₹8,870.00 -
8–100 mmGunmetalScrewed BSP
DRP G.M. Wheel (Globe) Valve No. 4, Screwed
Price range: ₹923.00 through ₹36,086.00 -
15–50 mmGunmetalScrewed BSP
DRP G.M. Wheel (Globe) Valve No. 5, Screwed
Price range: ₹1,710.00 through ₹12,666.00 -
15–100 mmGunmetalFlanged
DRP G.M. Wheel (Globe) Valve, Flanged (IS 778, Cl-1)
Price range: ₹5,110.00 through ₹76,026.00 -
15–100 mmGunmetalScrewed BSP
DRP G.M. Wheel (Globe) Valve, Screwed (IS 778, Cl-1)
Price range: ₹1,716.00 through ₹43,860.00 -
15–50 mmGunmetalFlanged
DRP Marine Globe Valve, Flanged (JIS 5K, F-7301)
Price range: ₹9,138.00 through ₹46,663.00
Other DRP ranges we carry
Common questions
What sizes does DRP Globe Valves come in?
8 mm to 100 mm, across 12 families with sizes and list prices given on this page.
What body materials are available in DRP Globe Valves?
Bronze, Gunmetal (LTB-2, IS 318), matched to the medium and pressure the size table specifies.
What standards does DRP Globe Valves meet?
IS 778, JIS 5K, where the family page states one. Not every family in this range prints a standard on its own catalogue sheet.
What end connections does DRP Globe Valves use?
Screwed BSP (parallel), Flanged, depending on the family and size — see the size table for the exact connection at the size you need.
Need a price on DRP Globe Valves?
Send the sizes, quantities and the duty. We will come back with a priced offer, alternatives where a substitution makes sense, and realistic lead times.
Request a quote