Honeywell Pressure Independent Control Valves

About the Honeywell picv range

Concept Engineers is an authorised Honeywell distributor. This page lists every Honeywell picv we carry — 8 families covering 15 mm to 250 mm, in 1 body materials.

Selection within this range starts with the duty — the medium, its working pressure and its temperature — and only then with the size. Getting that order the wrong way round is how the wrong material ends up on a line.

The range covers 15–25 mm, 32–50 mm, 65–100 mm, 125–200 mm and 250 mm. That span is not one design scaled up — the small end is screwed copper alloy, the large end is flanged and cast, and the break between them is where weight and handling start to matter.

The range is supplied with Screwed BSP (parallel) and Flanged ends. Which one is right is a question about the line, not about the valve, and it is the detail most often left off an enquiry.

Ratings in this range are PN 25 and PN 40. Specifying a class above the duty costs money and weight for nothing; specifying below it is the failure that is found the hard way.

Where an inspection certificate or an IBR form is required, say so with the enquiry — it is arranged with the manufacturer at order stage and cannot be added to a valve already despatched.

To quote picv properly we need the medium, the working pressure and the temperature in addition to sizes and quantities. Everything else on the enquiry can be inferred; that cannot.

List prices on this site are ex-GST. Registered buyers see their own net rates once signed in.